telephone: +44 (0) 1444 410040 email: sales@psmmarine.com
  • CN
  • VN
  • ES
  • RU
  • UK

A full range of transmitters, gauges, switches and display software

Take a look below at the full range of solutions to common marine tank gauging applications, and the PSM TankWatch products that will address your needs...

About Us
Cargo tank level or volume measurement
×

Cargo tank level or volume measurement

An advanced pulse radar sensor providing high performance with low maintenance needs. Compact design with no intrusive sensor dome ensures simplicity of installation.

Cargo tank overpressure and vacuum measurement
×

Cargo tank overpressure and vacuum measurement

ict 1000 with a direct pressure calibration measures the cargo tank inert gas blanket directly or in the vent manifold

See ICT 1000

See VentSafe

Ship's trim and list measurement
×

Ship's trim and list measurement

A pair of solid state, inclinometers installed 90° with respect to each other, measure bow <> stern and
port <> starboard angles

See Inclinometer

Wing ballast tank measurement
×

Wing ballast tank measurement

ict 1000 level transmitters are installed at the bottom of a stilling tube with cable exit via a deck penetration flange

See ICT 1000

Double-bottom ballast tank measurement
×

Double-bottom ballast tank measurement

ict 1000 level transmitters are installed using a clamp mount with cable exit via a liquid-tight bulkhead penetration

See ICT 1000

Bunker fuel oil measurement in engine room
×

Bunker fuel oil measurement in engine room

ict 1000 level transmitter with flange mount installed at the base of the tank via an isolating valve as isolation from potential high temperatures

See ICT 1000

Day tank fuel oil measurement in engine room
×

Day tank fuel oil measurement in engine room

Self-powered HCG contents gauge provides a local continuous indication of tank level with a KD 12 level switch used to detect a low level condition

See KD 12

See HCG

Local visual indication of tank level
×

Local visual indication of tank level

KD level gauges with flat or reflex glass provide a direct view of the level inside lubricating oil or boiler water feed tanks

See KDLG

See KDMLG

Level detection in bilges and void spaces
×

Level detection in bilges and void spaces

BLS 9200 bilge switches detect the rising level of water or oily waste as part of a pump control or flood detection safety system

See BLS 9200

See BilgeSafe

Ship's draught measurement
×

Ship's draught measurement

ict 1000 level transmitter installed inside a vented draught tube is used to measure the ship’s depth in the water

See ICT 1000

Overfill protection for waste water / oil storage
×

Overfill protection for waste water / oil storage

KD 30 level switch used to detect a high level condition in bilge and service tanks

See KD 30

Centralised Display
×

Centralised Display

TankView software provides centralised indication, alarm and control of all tanks. Repeater displays provide function critical information at additional locations

See TankView

See VPM 4300